Enjoyable simple project to make a 2×8 Combo from an old Chassis and cheap pineCarlsbro Scorpion Chassis from 1976.. came in a rather knackered unloaded 2×12 cab..Nicely laid out and wired up. Looks similar to HH products in stylestandard (for the time) 2x 2n3055 output transistors for around 40/45 Watts into 4 OhmsChassis acts as the heatsink in this design fairly thick Aluminium. nice simple connections to the transistorsOnly mod I carried out was to change the main coupling capacitor for the speaker and the 50 Volt supply caps (the supply ws dipping when playing the amp flat out.. also ghost notes…)OK simple pine frame made up for Dominator Style CabFront grill added and ready for sanding/finishSanded finished with simple Acrylic Varnish and Handle added (Vox Style)2×8 inch Jensen Chicargo Range speakers installed 35 watt 8 ohms should work well with the 45 Watt Carlsbro ChassisSimple grill cloth added inside the cab.. May change this and cover the ply front but does not look to bad as is.. nice and simple3 Feet addedBack panel on ready for testing. Semi open cab designSome room for leads in the backTesting on the bench and she is a loud bright sounding combo. Tremolo is great!On tiop of the original old 2×12 cab she came in.. it had had ahrd life and the chip board blown with water in various places..An improvement I think 😉Using her in my front roomGuitar there to give you an idea of scaleReal pleased with this project the angled front give really good sound projection fine for small gigs Interesting little project from a ebay purchased almost dead 1976 amp. I wanted to try out a 2×8 cab design as I had enjoyed playing my guitar through a Marble Blues Harp amp using these speakers. Also to give me a small easy to carry amp with some power. Like angle fronted cabs so gave this design an angled front. Really enjoyed this little project and the tone of the amp when cranked is very good and would give some tube amps a run for their money! Want to try her out with blues harp.